每个抽屉独立温度控制；
优化设计的热接触；
极佳的压力保护机制，使得应对各种不同突发条件，系统自身保护机制可以确保系统安全以及降低不必要的损失；
针对不同产品应用具有灵活的夹具配置；
结构紧凑，便于使用及维护；
集成的解决方案，使得系统在确保高品质的同时具有极好的性价比；
以极大的灵活度，支持同时多个器件的老化（最大单系统支持：1280pcs同时老化，具体数量根据用户要求及系统能力可以扩展）;
很灵活的使用：包括老化、寿命及验证性能；
| System Capacity | |
| 250mA per device | 1408 (see note 1) |
| 500mA per device | 704 (Max 1408, see note 2) |
| 1000mA per device | 352 (Max 1408, see note 2) |
| Temperature Control | |
| Temp control type | Each drawer independently |
| Temp control method | TEC or/and PCB heating board |
| Temp control range | 35°C to 120°C (See Note 3) |
| Temp control resolution | ± 0.1°C |
| Temp control Accuracy | ± 1°C |
| Temp control Uniformity | ± 1°C |
| Temp control Stability | ± 0.5°C |
| Laser Control | |
| Laser Driver Type | Each chip independently |
| Laser Driver Polarity | Bidirectional |
| Driver Current range | 0-250, or 500 or 1000mA (see note 4) |
| Driver Current read back | Included |
| Driver Current Resolution | 0.05% full scale |
| Driver Current Accuracy | ± 0.1% full scale |
| Driver Current Stability | ± 0.1% full scale |
| Driver Compliance Voltage | 5V |
| Voltage Measure Range | 5V |
| Voltage Measure Accuracy | ± 50mV |
| MPD Measure Range | 2uA-2mA |
| MPD Measure Accuracy | ± 0.1% full scale |
| Large PD measure range | 2uA to 2mA |
| Large PD measure Accuracy | ± 0.1% full scale |
| Large PD bias voltage range | 8V |
| Large PD bias voltage Accuracy | 50mV |
| Laser LIV speed | 2s |
| Electrical overshoot | No electrical overshoot allowed (<0.1% full scale) |
| Event Detection | Loss of power, Loss network, short, open, over temp |
| Optical Measurement | |
| Optical power measure capability | Optional (see note 5) |
| Optical power measure range | <100mW |
| Optical power measure resolution | 0.1% of full scale |
| Optical power measure accuracy | +/- 20% of full scale |
| Optical power measure stability | ± 0.1% of full scale |
| Wavelength Range | 800-1600nm |
| Wavelength measure capability | Optional (see note 5) |
| Burn-in fixture | |
| Device Types Supported | C-Mount, CT-Mount, COS, COH, COB, OHS, MEP, Fiber, Custom |
| CoC positions | 32pcs per fixture (could be 64pcs, see note 1) |
| Heat sink material | Nickel-Plated Aluminum (see note 6) |
| Electrical contact method | Pogo pin |
