This unit has the following configuration:
General Info: The JDS Uniphase SB, SC, and SCG series of Benchtop/Rackmount Programmable Switches can be controlled using the front panel keys and a numeric pad or via GPIB and serial RS232 interface. The SCG series ganged input switches allow a single switch instrument to replace multiple switch elements while maintaining low loss. In this series of switches, the inputs are ganged together in a particular sequence and are thus able to offer three different modes of operation (D, E, and F configurations).
The SB and SC series switches are available in four basic configurations, namely C, D, E, and F. The C configuration is a single common input model. The D configuration provides simultaneous connection of a bank of input fibers to output fibers. The E configuration allows any input to be connected to any output while other inputs/outputs are aligned to subsequent/adjacent channels. The switch is non-blocking in this mode and other inputs/outputs are aligned. The F configuration enables one of the inputs to be aligned with an output in a blocking sense, with a result in reduction of available output channels. A low-loss MxN blocking switch is the result.
Key Features
SB switches can accommodate up to 48 channels
SC switches can accommodate up to 180 channels
SB and SC series switches offer up to four input channels
Low insertion loss, 0.4 dB typical
Excellent repeatability, 0.003 dB typical
High return loss,> 65 dB typical
GPIB and RS232 remote control
Complies to CE requirements plus UL3101-1 and CAN/CSA-C22.2 No. 1010.1
